China factory 2 Axls 38 Cubic Carbon Steel Fuel Tank Oil Tanker Semi-Trailer with Hot selling

Product Description

2 Axle 38cbm Fuel Oil Tank Tanker Semi Trailer 

We can provide special design and production and environmental protection equipment, low flat-panel semi-trailer, container chassis frame semi trailer, semi-trailer tank, bulk cement tank semi-trailer, semi-trailer, side wall, box semi-trailer semi-trailer, dump semi-trailer, full trailer, dump truck, fuel tank truck, water tank truck, cargo truck, reasonable price and service advantages.

Specification:

Tank assembly  Front/Rear end plate  Material  Carbon steel 
Front/Rear end plate thickness 6mm
Tank body  Material  Carbon steel 
Thickness  5mm
Compartment  One 
Manhole cover  Diameter  500mm
Material  Q235
Number  3pcs 

Running mechanism

 

Discharging valve  Diameter  3 inch 
Material  API standard 
Number  4 pcs 
Wave-proof plate thickness          4 mm
Bottom safety valve            4 inch 
Discharging pipe  Diameter  3 inch 
Type  Rubber hose,2pcs 
Cat walk  Standard 
Axle  Brand  Fuwa 
   Type  13t 
   Number  2pcs 
Rim  Type  9.0-22.5
   Number  12 pcs 
Tire     Brand  Triangle brand 
   Type  12R22.5
   Number  9pcs 
Suspension    air suspension  
Spring leaf  Leaf width  90mm
Leaf thickness 13mm
Layer/set  10 Layer 
King pin     Type  Bolts type 
Diameter  2  or 3.5 inch 
Brake system  Air tank  38L air tanks 
Brake chamber 4 double spring brake chamber 
    ABS  Without 
Landing gear  Brand  JOST 
Type  E100 2 speed

Accessories 

 

Spare tire carrier             One 
Light             LED light 
Voltage             24v 
Receptacle  7 ways(7wire harness)and quick change type 
Tool box  One piece,1000x500x500mm
Painting  Polyurethane paint&anti-rust primer&sand blasting 
Tools for trailer  Head wrench ;spare wheel crank ; one fire extinguisher; Operation Manual

product details

Trailer advantages description:
·More than 20 years professional design and production experience.
·Choose Regular manufacturers purchase materials,like Q235 HangZhou.
·Use Domestic first-class production equipment.
·Famouse brand trailer parts used,like,Fuwa axle,triangle/double star/double coin and so on tires,
  Air pressure test for each tanker.
·Strict quality control system ensure that each semi trailer is qualified.
Delivery
Wax spray by frame container

For more details:

Accessories pictures:

Workshop photo:
1,Sandblasting room
2,90 – degree rollover
3,Girder docking machine
4,Laser CNC machine tool

The production workshop:

1.24-hours hot line at your service, available for quality and extending service. 
2. Lifelong free technical guidance service can be provided. 
3. For Customers who buy bulk quantity for the first time, we can send service technicians to offer site instruction service
And short- term stationary point service. 

4.Free technical training can be provided to help customers use and maintain the trucks and trailers quickly and correctly.

FAQ:

1) What is your terms of payment?
30% deposit, and 70% balance will be paid before delivery.
We will show you photos of the products and packages before you paying the balance.
2) What’s your minimum quantity?
1 set.
3) What is your packing?
Naked packing, we transport our trailers by bulk cargo carrier, ro-ro or 40/45 HQ or land transportation.
4) How about delivery time?
Generally speaking, 25 workdays after we received 30% of contract value T/T down payment.The specific delivery time
depends on the products and the quantity of your order.
5) How to judge the quality of products?
We will show you photos and videos, trading order.You are welcome to visit our factory at any time.
6)  Are you a manufacturer?
Yes, we have been in special vehicle manufacturing and marketiing for over 20 years.
7.) What markets do your vehicle export to?
Europe, North & South America, South-East Asia,Africa, Oceanica, Middle East countries etc.  
8)  What information should I let you know if I want to get a quotation?
Please let us know the your purpose,road condition,cargo type,tons of your cargo,dimensions of trailer,quantity etc. The more
info you provide, the more accurate model and price you will get.  
9)  Is it available to print our own brand on the vehicle?
Totally acceptable as you wish.
10.) How can I get the price of your vehicle?
You can connect with us through any of the following contact information. Our personalized service person will respond
you within 24 hours. 
 
 
***************************************************************************

  

 

How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from 1 side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:
air-compressor

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.
air-compressor

U-joint

Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are 2 types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at 1 end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are 2 types of lug structures: 1 is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.
air-compressor

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.

bushing

The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.

China factory 2 Axls 38 Cubic Carbon Steel Fuel Tank Oil Tanker Semi-Trailer   with Hot sellingChina factory 2 Axls 38 Cubic Carbon Steel Fuel Tank Oil Tanker Semi-Trailer   with Hot selling